If you have Armor All or a similar automotive protectant product on your windshield and want to remove it, you can follow these steps:

Materials You’ll Need:

• Glass cleaner (ammonia-free)
• Microfiber or lint-free cloth
• Plastic razor blade (optional)

Steps to Remove Armor All from Windshield:

1. Choose the Right Glass Cleaner:
   • Select a high-quality glass cleaner that is ammonia-free. Ammonia-free cleaners are safer for automotive glass and won’t damage it.
2. Ventilate the Area:
   • Ensure you’re working in a well-ventilated area or open your car’s windows to prevent inhaling fumes from the cleaner.
3. Spray the Glass Cleaner:
   • Spray a generous amount of the ammonia-free glass cleaner directly onto the windshield where the Armor All is applied. Make sure to cover the affected areas completely.
4. Let It Sit:
   • Allow the glass cleaner to sit on the Armor All for a minute or two. This will help loosen and break down the protectant.
5. Scrub Gently:
   • Use a microfiber or lint-free cloth to scrub the treated areas of the windshield. Apply gentle pressure and use circular or back-and-forth motions. This will help lift and remove the Armor All.
6. Repeat If Necessary:
   • Depending on the thickness of the Armor All layer, you may need to repeat steps 3 to 5 until all of it is removed.
7. Check for Residue:
   • After scrubbing, inspect the windshield for any remaining residue. If you notice stubborn spots or streaks, you can repeat the process in those areas.
8. Rinse and Dry:
   • Rinse the windshield thoroughly with clean water to remove any remaining glass cleaner and residue. Then, use a dry microfiber cloth to wipe the windshield dry. Ensure there are no streaks or residue left behind.
9. Use a Plastic Razor Blade (if needed):
   • If there are still tough spots or if you want to be extra thorough, you can use a plastic razor blade to gently scrape off any remaining residue. Be very cautious not to scratch the glass, and use the blade at a low angle to avoid damage.
10. Final Cleaning:
    • Finish by cleaning the entire windshield with a fresh, clean microfiber or lint-free cloth and a final application of the ammonia-free glass cleaner to ensure it’s completely clear and streak-free.

Remember that removing Armor All from your windshield may take a bit of time and effort, especially if it has built up over time. Be patient and persistent, and avoid using harsh chemicals or abrasive materials that could scratch or damage the glass. Always use proper safety precautions when working with automotive cleaning products.